OUR Coatings here at The Grime Stoppers INC-MicroGuard & ETS 180

See Below for Results and Information:


Hard Tile, Decorative Stone & Terrazzo:

MicroGuard Hard Tile Clear Gloss Treatment provides a long lasting and stunningly beautiful finish that positively protects tile, stone and terrazzo surfaces from abrasive wear, mold growth and chemical attack. Its hydrophobic film properties naturally repel dirt and other debris, which helps reduce the cost of cleaning chemicals and labor costs associated with cleaning maintenance.

Suitable for horizontal flooring and vertical wall installations, the cured film of MicroGuard is water-clear, highly UV light resistant and maintains its depth of image without waxing or buffing. Grout is positively sealed and resists common stains such as oily grime, dirt, urea, mold and food or beverage products.

Primary benefits include:

  • Unparalleled Abrasion Resistance
  • Mitigate mold growth
  • Improved traction on floor surfaces
  • Eliminates the need for waxing & buffing
  • Surfaces are easier to clean and maintain
  • Provides excellent stain resistance properties
  • Crystal clear finish is non-yellowing
  • Highly resistant to common graffiti tagging
  • Vibrantly enhances the color of decorative stone
  • Interior or exterior installations


Concrete, Brick Pavers and Masonry:

MicroGuard Concrete Clear Gloss Treatment is an ideal ‘Wet Look Sealer’ for use on decorative brick pavers or exterior concrete surfaces, such as sidewalks, driveways, patios, pool decks; anywhere mitigating mold growth or minimizing organic staining is important. When used as an impregnating sealer, a beautiful and subtle satin sheen is achieved and colors within the substate are dramatically enhanced. It may also be used in conduction with our Gloss Treatment as a finishing coat or for coating interior concrete floors, such as factory or warehouse installations, auto repair bays, aircraft hangars or anywhere abrasion, solvent, chemical and stain resistance is imperative.

Primary benefits include:

  • Outstanding abrasion resistance
  • Will not support mold growth
  • Improved foot traction
  • Minimizes ‘dusting’ and ‘spalling’ of surface
  • Extreme solvent & chemical resistance
  • Excellent stain resistance properties
  • Easier to clean & maintain surfaces



The Microguard/MicroGrip Anti-Skid Floor System is designed to reduce the potential for slipping hazard in:

  • Commercial Kitchens
  • Food Service Lines
  • Automotive Repair Bays
  • Handicap Ramps
  • Public Walkways & Stairs

MicroGuard/MicroGrip outperformed other competitive anti-skid floor systems, is competitively priced and may be applied to many rigid floor surfaces in commercial, industrial or residential environments.

MicroGrip Anti-Skid Media, combined with MicroGuard clear siloxane floor treatments, deliver increased traction, chemical and abrasion resistance properties to concrete, hard tile, terrazzo and quarry tile floors. This system will not support mold growth and is easier to clean and maintain. because the system is clear, it maintains floor color without sacrificing traction properties.

The patented clear siloxane treatments extend the performance life of the surface, while also reducing cleaning and maintenance costs. This Anti-Skid system is quickly installed and accommodated busy operating or construction schedules.

Primary Benefits Include:

  • Reduces slip & fall risks
  • Excellent Abrasion resistance
  • Easty to clean & maintain
  • Maintains floor color
  • Highly resistant to chemicals
  • Impervious to standing water


thsr ctg 7

thsr ctg 3thsr ctg 4tile cleaning sm

ETS 180 Coatings


Maximize your VCT floorCoated VCT will not lose color or shine over time and never needs to be stripped, buffed or burnished.

– Waxing VCT is common and demands too much employee time with stripping, buffing and burnishing

– A waxed floor can lose shine after only a few weeks under normal wear

– The process of waxing spreads contaminates onto other floors, walls and into the facilities air

ETS Health can help.– ETS floor coating creates a single membrane over the entire surface area, eliminating seams where contamination collects

– Coated floors are easy to clean, and keep clean, using only hot water

– No stripping, buffing or burnishing

– No expensive chemicals

– Coated floors look great and retain their appearance for 3-4 years or more

“After the initial application, we experienced a positive return on our investment within 10 months.”

– Joe Ahner, Facilities Operations Manager, Mille Lacs County, MN

Other Surfaces coated:


Terrazzo flooring collects contaminates-Terrazzo flooring can absorb dirt, urine and contaminates even when polished

Sheet Vinyl / Linoleum

Seams in Sheet Vinyl/Linoleum have to be repaired often due to contamination from wax stripping methods-ETS floor coating seals these seams, eliminating the need for repeated repairs.

Tile and Grout


Grout is Raw CementGrout absorbs urine, dirt and other contaminates causing odors and spreading germs

– Grout is continually dirty, consuming employee time with minimal cleaning results

– Dirty grout gives a facility a poor appearance

ETS Health can help.-ETS floor coating creates a single membrane over the entire surface area, eliminating seams where contamination collects

– Coated grout lines will not discolor or collect dirt and other contaminates

– Coated floors are easy to clean, and keep clean, using only hot water

– Coated floors look great and retain their appearance for 3-4 years or more